|
BUKH
|
Max continuous rating
(ISO3046) at:
| 60 rps (3600 rpm) |
32 HP (23.5 kW) |
| 50 rps (3000 rpm) |
28.3 HP (20.8 kW) |
| 40 rps (2400 rpm) |
23.2 HP (17 kW) |
| 33 rps (2000 rpm) |
19 HP (13.9 kW) |
| Reverse-reduction gear ratio |
3:1 - 2.5:1 - 2:1 |
| Engine rotation (looking forward) |
Anti-clockwise |
| Propeller rotation (looking forward) |
Clockwise |
| Number of cylinders |
2 |
| Bore x stroke |
3.35 x 3.35 in (85 x 85 mm) |
| Swept volume |
58.82 cu in (964 cm³) |
| Operating principle |
4-stroke, diesel |
| Turbo charge pressure |
0.8 Bar (11.6 psi) |
| Cooling system (standard) |
Direct seawater |
| Max inclination, fore and aft |
12° |
| Max heel, continuous |
25° |
| Fuel consumption, full load |
1.65 imp galls/h (7.5 l/h) |
| Fuel consumption, cruising |
0.94 imp galls/h (4.3 l/h) |
| Electric starter motor |
12V - 1.36 HP (1.0 kW) |
| Charging alternator |
14V, 50Amp, 700W |
| Net weight |
481 lbs (218 kg) |
|
Click on image to view the enlarged version. |
STANDARD EQUIPMENT:
- Reverse-reduction gear
- Turbocharger
- Raised handstart
- Decompression lever
- Wet sump lubrication system
- Pre and main (full flow) filter
- Automatic injection timing
- Centrifugal governor
- Seawater cooling with thermostat
- Air inlet filter and silencer
- Fuel lift pump
- Electric start and charging alternator
- Remote operating panel with: Charging light, luboil pressure warning light, cooling water temperature warning light, key switch for start and electric stop and audible warning
- Fittings for remote control
- Zinc anode protection
- Drain pump for luboil
- Flexible engine mounts
- Watercooled exhaust bend
- Watercooled exhaust manifold
- Designed for remote control
- Standard set of tools
- Operating manual
As Aabenraa Motorfabrik is always endeavouring to improve the engines, specifications mentioned are subject to alterations without previous notice. |
Click on image to view the enlarged version. |
|
